So, your ceiling fan remote has decided to retire early? Maybe it’s ignoring your button mashing like a moody teenager. Don’t panic—if you’ve got the Hampton Bay 276-337 remote, I’m about to walk you through how to troubleshoot it, change the battery without launching it across the room, and get your fan spinning like it just chugged an energy drink.
What the Heck Is the 276-337 Remote Anyway?
This model is a classic. It’s the peanut butter to many Hampton Bay ceiling fan’s jelly. It doesn’t have a fancy screen, it doesn’t beep, and it definitely doesn’t connect to Wi-Fi. But what it does do is control fan speed and lights with zero sass—when it’s functioning properly.
It’s a simple remote with labeled buttons for fan speeds (High, Medium, Low), a power Off button, and a Light button. Some versions allow light dimming if your fan’s receiver supports it. If you press buttons and nothing happens, don’t assume it’s dead—yet.

Battery Replacement – The Not-So-Obvious Process
You’d think changing a battery would be easy. But with this remote, the casing can be as stubborn as a jar of pickles. Here’s how to crack it open (without actually cracking it):
- Turn the remote over to the smooth backside.
- Slide the battery compartment downward—emphasis on slide, not pry.
- Remove the dead 9V battery and replace it with a fresh one. Make sure the terminals are fully seated. (Backwards batteries = sadness.)
- Slide the back cover on again. If your fan chirps or the light responds, you’re golden.
Pro tip: Even if the remote’s LED lights up when you press a button, that doesn’t mean the battery’s strong enough to transmit. Swap it with a new one if in doubt.
Programming the Remote: The Sacred Bonding Ritual
If the battery’s good but the fan’s acting like it’s never seen this remote before, you may need to re-pair them. Think of it as setting them up on a second date:
- Go to your circuit breaker and shut off power to the ceiling fan. Don’t just flick the wall switch—go full nuclear.
- Wait 30 seconds, then flip the breaker back on. This resets the receiver in the fan’s canopy.
- Within 30 seconds of restoring power, press and hold the High and Light buttons on your remote simultaneously for 5 to 10 seconds.
- If the light blinks or the fan jiggles slightly, the sync worked. They’re in love again.
Note: If your remote doesn’t respond to pairing, pop the battery compartment open and look for tiny DIP switches. Some models use these instead of digital pairing. Check that the dipswitch settings on your remote match exactly the ones inside the fan receiver. Even one switch out of place and it’s like you’re speaking different languages.
Common Issues with the 276-337 (And How to Slap Them Into Submission)
- Buttons feel fine, but nothing happens: Battery might be low voltage. Or the receiver in the fan has quit. Test with another remote if possible.
- Only light control works: You’re partially paired. Go through the full reset and pair process above.
- Remote only works from 3 feet away: Weak battery or signal interference. Try moving any electronics away from the fan area. Also: change the battery.
- Light doesn’t dim: Not all fans support dimming. If yours does, hold down the Light button instead of tapping it. Tapping toggles it on/off. Holding = dimming magic.
When It’s Time to Say Goodbye (and What to Replace It With)
If you’ve tried fresh batteries, re-pairing, and maybe even some light cursing—and it still won’t work—it may be time to replace your 276-337. The exact model can be hard to find since it’s older, but the good news? Hampton Bay has universal remote kits that work on nearly all their fans. These often come with a replacement receiver, so you’re basically installing a new brain into the fan.
Some good replacement options include:
- Hampton Bay Universal Remote Kit (with receiver)
- Anderic RR7079T (compatible with many older Hampton Bay models)
- Or, if you’re upgrading—Bond Bridge, for voice and app control!
It might look like a chunk of plastic from the early 2000s, but the Hampton Bay 276-337 remote is the key to your cool and breezy paradise. Whether you’re flipping fan speeds or toggling light levels, it’s worth keeping this little tool in good shape. And if it ever fails you—don’t sweat it. (Well, okay, you might literally sweat without the fan—but you know what I mean.)
Stay cool, my friend. Literally.